Search

BSA/Triumph Handlebar Cap Bolt

Made in England

BSA/Triumph Nylock T-TypeNut 3/8" UNF

Made in England

Triumph Anchor Pin

Made in England

BSA O-Ring Filter/Triumph Push Rod Tube/Inspection Plug O-Ring
fits also Inspection Plug 57-2166

Made in England

BSA/Triumph Fiber Washer
1"1/8 x 13/16x 1/16"


OD: 28.5 mm
ID: 21mm

Triumph Connecting Rod Bolt 500, 650cc pre-unit Twins 5/16" UNF
Pair
Replace E2490A.70-2490

Made in England

Triumph Connecting Rod Bolt 500, 650cc pre-unit Twins 5/16" UNF
Nut - 21-2016
Replace E2490A

Fibre Washer
11/16" x 1 1/8" x 1/16"

Tank Rack/Parcel Grid 2 Bar Triumph Unit
1960 onwards
Made in England

Oil Seal Mainshaft High Gear Triumph

Made in England

O-Ring Triumph
Made in England

Tank Mounting Rubber/Bolt Set rear T100
82-7388
82-0967
82-3814
82-5336

Triumph Petrol Tank Mounting Cupped Washer rear

Made in England

O-Ring Petrol Tank Top BSA/Triumph

ID: 33,5 mm
OD:48,5 mm
W: 7,5 mm

Front Fork Spring Triumph  yellow/blueL: 9 3/4" ca. 249 mm
Made in England

BSA/Triumph Spring Support WasherOil Seal Washer

Triumph Bolt for Petrol Tank 5/16" x 24TPI

Primary Chaincase Gasket T150/T160/A75

suitable BSA/Triumph 750cc OHV
& 3 Cylinder Machines 1972 -on
T160

Fork Oil Seals BSA  A65, A75. 1971-1972.

Made in England

Triumph 3TA Clutch Assembly Made in England

Triumph Gearbox Inner and Outer Cover Gasket

Damper Valve - O-Ring Triumph
f. Telescopic Front Fork

1972 Models 650cc
Bonneville T120R, T120RV
Tiger 650 TR6R, TR6RV
Trophy 650 TR6C, TR6CV

Triumph Bonded Washer with Sealing Ring
ID: 8,8 mm

Made in England

This Pair of conrods is to replace the white metal bearing conrod, which is no longer available, and to give the possibility to grind the crankshaft to -010, -020,-030 or -040 thou (-040 = 1 mm under standard)Big end bearing type Steel backed white metal   Big end journal dia. STD 1.4375-1.4380 in. (36.513/36.525 mm)        Bearing side clearance .013/.017 in. (.3302/.4018 mm)        Bearing diametral clearance .0005/.0020 in. min. (.0127/.0508 mm)Triumph Conrod with Small Bearing Crank 500cc pre unit / Pair 5T, TR5, T100 1937-51

use Big End Shell No.:
70-3706.std
70-3706/10
70-3706/20
70-3706/30
70-3706/40

Made by Velocette - Velocette Ltd.only to be fitted to Layshaft 25T.

Gearshaft First Gear Assembly - 26T inc Bush - Standard ratio Width at teeth: 14 mmWidth at bush:  24 mm