Search

Royal Enfield / Albian Kickstart Spring NOS long arm New, old stock

Royal Enfield Kickstart Spring 1933-46 NOS H, A, 31S, 18 New, old stock  

BSA Kickstart Spring 1930 NOS OD: 2" 9/16 ID: 2" 5/16 new old stock

AJS/Matchless G80CS Air Filter Rubber 1965 Made in England Please look at all pictures - measurements

AJS/Matchless. Clutch Center  for 4 Spring 4 Plate Clutch Burman 350ccThis part can also be used for 500cc. only using 4 clutch plates. 2-X-16 is not avalable. use a little more clutch spring tension if there is slip.1939 - 49Made in EnglandPlease look at all picutres

BSA W33/7 Transfer Set6787 for tank sides x26072 for tank sides x26072 for headstock x16060 for rear mudguard x 18257 for rear Number Plate and 6060 for underneath this are waterslide transfers

Compression Ratio 8.5:1 Velocette Viper Piston 350 cc  STD=72 mm  1956- incl. piston rings, gudgeon pin and circlips piston clearance 0,12 mm

Velocette Viper Piston 350 cc  +020 =72.5 mm  1956- Compression Ratio 8.5:1 incl. piston rings, gudgeon pin and circlips piston clearance 0,12 mm

Velocette Viper Piston 350 cc  +040 =73 mm  1956- Compression Ratio 8.5:1 incl. piston rings, gudgeon pin and circlips piston clearance 0,12 mm

Velocette Viper Piston 350 cc  +060=73.5 mm  1956- Compression Ratio 8.5:1 incl. piston rings, gudgeon pin and circlips piston clearance 0,12 mm

Magneto Pick-Up / pick up Body MO1 Lucas    

Triumph 500cc Unit Front Engine Stud 84.5mm x 3/8" = 9.5mm Made in England

Triumph Stud - Tail Lamp Support 1972/82 UNF UNC 1/4" x 7/8" 6,2mm x 22mm Made in England new, old stock  

Triumph Stud UNF /UNC 3 3/4" long = 95,5mm 5/16" = 7,9mm UNF - UNC

Triumph Stud - 3 Cylinder Barrel Made in England

Triumph T140 Head Stud 4 9/32" = 109mm 3/8" = 9.4mm UNF - UNC Made in England

Triumph Stud 4 13/32" = 112mm 5/16" = 8mm Made in England  

Triumph Tank Support Bracket Bolt 50mm UH = 1 31/32" Thin Head 3/8" = 9,6mm 26 TPI CEI BSC Made in England

Triumph T150 T160 Sump Plate Stud 1/4 UNF / UNC 32,5mm = 1 1/4" Made in England

Triumph Stud Made in England

Triumph 6T/ 110/ R6/ 120P/ Unit Stud - Cylinder Barrel3/8" 26 TPIBSC - WW UNC1 13/16" = 46mmMade in England

Triumph T100 Manifold Stud 1945- 1/4" = 6mm 1 13/16" = 46mm BSC 26 TPI Made in England

Triumph T100 Cylinder Base Stud 3/8" = 9,5mm 1 27/32" = 47mm 26 TPI BSC - WW Made in England

Triumph 3TA Front Engine Stud 5/16" = 7,9mm 3 13/16" = 96,5mm 5/16 x 26 TPI BSC 5/16 x 22 TPI BSF Made in England  

Triumph Stud - Cylinder Base B Range 650 3/8" = 9,5mm 1 27/32" = 46,5mm 26 TPI BSC WW Made in England