Search

Bush Swinging Arm Cub 350/500 /Pair
Price per Pair

Made in England

Head Race Set
Price per set
3TA/T90/T21.5TA/T100/T100A/T100SS/T100T

does not fit the 3T

Made in EnglandPlease look at pictures and measurements before ordering

Half Race Ex Camshaft Triumph Unit 650cc
Made in England

Inlet Camshaft Triumph 650cc pre unit and Unit 650 Twins
Made in England

Wheel Sprocket/Brake Drum 43T.
Triumph 350 500 650cc
8 Bolt hole type,
Pre OIF
Made in England
 

Big Bore Kit Triumph. New.  650cc - 750cc. 
9 stud, 76 mm bore = 750 cc. 
650 cc 9stud head can be used. Compr. 8,6:1. ROUTT Big Bore. E6304+100cc = 70-6304, 750cc. 
barrel, pistons, head gasket PS214. 
Cylinder and rings made in England.  Please look at all pictures. 
 

Rear Chainguard Triumph
T100 1958-1973
T120 1963

Made in England Please look at ALL pictures.
 

Oil Pump Triumph Pre Unit
3T,5T,6T,T100,T120,TR5,TR6 Pre unit

Made in England

Triumph Piston 750cc T140V/TR7V +20
76mm+20,
compr. ratio: 7,4:1,
price per Pair
Low comp.
gudgeon pin diameter: 19 mm
Piston Clearance 0.12mm or 45thoucomplete with piston rings, circlips and gudgeon pin

Triumph. Chainguard Triumph Oil in Frame. Made in England. Please look at all pictures
 

Master Cylinder Seal Kit Triumph. Std.
Made in England
3871-473
106418
4312-318
3842-424
3818-747
 

Triumph Adapter Ring for 900 Concentric Carburettor
OD: 47.8 mm

Made in England


 

Triumph Kneegrip rubbers T120/T140 1971-78

price p. pair

FITTED WITH OIL SEALS; 1960-09/1963, Price per Pair
This part includes:
Oil seal 97-1168 and Alloy sleeve 97-1196
This system was used on Triumph till Sept. 1963, after which was external springs.
This information comes from the original drawings from Triumph.

Coild 6V6 Vsupplied by Boyer

Mounting clip = Art. No. 54419974Total hight: 112 mmOD: 40 mmMade in EEC

Triumph, Tappet Guide Block.
suitable f. Pre Unit Iron Cylinder

Made in England

Brake Shoes front Triumph 8"
1936-64
Price per Pair

37-1337.37-1338
Replaces the following numbers:
68-5524.68-5525.42-5867.42-5868

now replace W631 37-0631
suitable Front Wheel 6/1 1936
Front wheel 5H 6S T90 1939-39
All Sprung Hub Wheels MKI and MKII and 8" Front Wheel 1955-64
Width: 28mm
Replaces BSA 8" front Full width hub fully floating Please look at all pictures

BSA. Triumph Brake Shoes / Pair 3TA.T100.T120.6T.T150.T160.A50.A65.A75  7" fully floatingreplaces all 7" Triumph brake shoes from 1937 incl. WD Mod.
Price per Pair.
Brake Shoe Triumph 7"
BSA A75
Rear Leading
Rear Trailing
Width: 29mm

Petrol Tank Styling Strip Triumph Pre-Unit 1956-1959

Measurement/Curve: 47.5cm Please look at ALL pictures.

Air Filter 600/376 Center Screw On /Pair
 airfilter
Outside Diameter 125 mm
maximum width from the mouth of the intake to the rear of the unit. Approx... 51 mm
ID: 40 mm

Triumph Pivot Bolts incl. washers a. Nuts 26TPI
Price per Pair

Made in England
 

Triumph Kickstart Crank (Splined) T100 Daytona Only 1971-74

Twist Grip Triumph 500/650cc Pre Unit. 

To fit reduced 1" to 15/16" handlebars. Rubber length: 158mm

 

Cam Wheel Extrator Triumph Twins350cc. 500cc. 650cc. Pre-Unit & Unit.ID ca. 30 mm26 TPI

Handlebars Clamp Triumph 7/8
black