Search

Used 12 V and late 6 V systems  1973
OD 74mm. W 35mm. Hole 3/4"
replaces all previous rotors

BSA A10 Kickstart Crank

Triumph Piston T80 NOS 1934-1940 = 71 mm Tiger 80 Compr. Ratio 6:1 Mod.6/1 Compr. ratio 5.75:1 3/2  3H  Compr. ratio 6:1 inc. piston rings, gudgeon pin needs replacing    

Triumph 350 cc Piston NOS  +040 71 mm no rings needs replacement gudgeon pin

BSA Piston NOS 75 mm  

AJS/Matchless Twins Rocker Cover Gasket
1953- Set of 4

BSA / Triumph Rear Conical Hub used 1971-1973   for restoration - no warranty Please look at all pictures

Rear Wheel used Timken Bearing for restoration - no warranty Please look at all pictures

BSA C12 Silencer 1 1/2" 38mmchromePlease look at all pictures

Wheel Rim WM2 19" used40 Holeswidth 68 mmfor restoration - no warrantyPlease look at all pictures

Inspection Cover Chaincase BSA

Footrest Denfeld Pair used for restoration - no warranty

Adjuster Screw with Nut f.  Carburettor Amal - 4 pieces
Screw Diameter: 5.5mm
40TPI ME ( indicates 40 Model Engineering thread) L: 7/32"

375.376.389.626.928.930.932.1000.2000

Made in England

BSA Footrest C10. C11 used  near side to fit 4 and 3-speed gearbox left hand side no guarantee

Mod. 31. 1960-66 G12 1960-66 Head 1.594" = 40,487 mm Stem 0.280" =  7,11 mm Length 4.538" = 115,26 mm  

Ariel Inlet Valve 1935-50 NF. NG. NH. WD Head 1.562"= 39,67 mm Stem: 0,12" = 3,048 mm L: 3,687"= 93,65 mm Made in England

Ariel Exhaust Valve 350 cc 1935-1950 NH. NF. NG. WD 1951-55 NH Mod. Head 1.562"= 39,67 mm Stem: 0,341" = 10,414 mm L: 3,709"= 94,2086 mm Made in England      

Boyer Engine Timing over RPM Range  Electroni Ignition

Amal Cap Spring - Ferrule Type 289. 389 Made in UK

Amal Carburettor Cap Spring. Clip Pre Monobloc Rod Choke Ariel Only Made in UK

Amal Carburettor 289AB Puch Mod. SG-SS 250 cc B/F 1959Made in UKNeedle Jet 106PilotValve 3Main 220

Amal Puch SG-SS 250cc Carburettor Set 1958-59Made in EnglandInternal bore 1 1/8"Made in Englandreplaces the original Carburettors 289AA/2EP Mainjet 200. Needle Jet 106. Slide/Throttle Valve No. 3, Float = 2EPand 289AB  - Mainjet 220. Needle Jet 106. Slide/Throttle Valve No. 3,original bore was 1 3/16"  --- new Bore 1 1/8" (due to cracks)Please note: if your carburettor manifold Inlet is 35 mm your bike was originally not fitted with Amal Carburettors.Solution at 35 mm: make a new manifold to fit the new Amal carburettors.Please look at all pictures 

Amal BSA M20 UK and Export Carburettor STD 1955-56 Main Jet: 240Needle Jet: 106Pilot Jet: 30Valve: 5Made in England

Amal Matchless G3L Carburetter STD 1945-50. 1" Iron head15° Float Bowl. Float Chamber left hand side. Bottom feed Nut NippleMain Jet: 150Needle Jet: 106Valve: 42 adjusters in the carburetter top.Made in EnglandReplaces 274 and "7441WD.  

Adjuster Screw with Nut f.  Carburettor Amal
Screw Diameter: 5.5mm
40TPI ME ( indicates 40 Model Engineering thread) L: 7/32"

375.376.389.289.626.928.930.932.1000.2000

Made in England