Search

Spanner Norton 16H new, old stock
 

Norton 16H Conrod used
for 100mm stroke

for restoration - no warranty

Norton 16H Conrod used
for 100mm stroke

for restoration - no warranty

44887
G12. 1966
T264
T6846
20666
The Drive side case is from a Model 7 500CC engine. The Stamping G12 and engine number 44887 would suggest this as being from a dynamo model as manufactutured in 1952. See attachment. The Timing side case is from a later non-dynamo engine. Probably from an alternator Model 88 or 99 manufactured 7 to 9 years later. It would be quite difficult to build this engine into a 750cc motor as that would require extensive modifications.
The Norton factory always stamped both cases and sometimes the Timing Cover with the same number. On the Drive case this would be inside just above the bearing. On the Timing case it is outside usually just above the half timing pinion shaft.
 

Norton Bottom Fork Links used /Pair

for restoration - no warranty 1pr only.

Norton Bottom Fork Link used

for restoration - no warranty

Norton,Mudguard with Rib used, front

for restoration - no warranty

Norton Roadholder Badge with Screws

Made in England

Inlet Rocker right hand Norton NOS new, old stock

Brake Lever Tie Rod Norton 750cc - 1971

Made in England

Front Brake Hose Norton 28" - 711 mm = NUT to Nut
Total Length 745 mm
Made in England Please look at ALL pictures

Pivot Pin - Brake Shoe Norton 750 - 1971

Tacho Drive Housing with Oil Seal Norton

Made in England

Bolt 3/8"
Norton 750 - 1971

Made in England

Norton Inner Gearbox Cover Gasket f. Laydown Gearbox

f. all models with laydown gearbox
Manx, International, ES2, Mod. 50, early Dominator

Norton Outer Gearbox Cover Gasket f. Laydown Gearbox

f. all models with laydown gearbox
Manx, International, ES2, Mod. 50, early Dominator

Norton 16H, Wormshaft
measurements see 4th picture new, old stock

Norton Engine Mounting Plates used

for restoration - no warranty

Needle Bearing Norton 850 MK III - 1975
OD: 1 1/4"
ID: 1"
H: 26/32"

Made in England

Thrust Washer Norton, shouldered

Made in England

Inlet Rocker left hand Norton NOS new, old stock

Prop Stand Pivot Pin Norton

Made in England

Shaft for Starter Drive Norton 850 MK III - 1975

Made in England

Washer Norton MK3 850cc behind sprag

Made in England

Norton Circlip - Outer MK3 850cc -1975
anti backfire

Made in England