Search

Norton Dollshead Gearbox Kickstart Kit
Kickstart Shaft 3602 (NOS)
Bush outer 9707 (NOS)
Kickstart Pawel 9699 06-2015
Spring 9708 04-0044
Pin 9700 04-0033
Cover 9709 04-0069
Spring BS-0213 9710
Cover outer 9701 NMA2/358.BS-0686 new, old stock - used for restoration - no warranty

Conrod Pair A65 - bushless conrod
LH + RHsmall end hole 19 mmno bush needed

Made in England

Fork Stanchions. Bsa. C11. PrMade in England Bush end 1.1/4".
Yoke 1.3/8"
 Length 20.1/8"
1.1/4 = 31.7mm
I.3/8" = 35mm
20.1/8" = 511mm

complete
compr. ratio 9.4:1
Dm. 79 mm
Made by GPM
Middle gudgeon pin to lowest point of piston: 29 mm
Middle gudgeon pin to highest point of piston: 41,5 mm
Gudgeon pin diam. 19 mm

can be used f. Norton ES2 or 16H higher compression piston - but need a small end bush
Piston Clearence 0.12mm or 45thoumit Kolbenbolzen, Kolbenringen und Sicherungsringen

Dominator Clutch  Roller 1/4" x 1/4" 3597 - 13 pieces to fit inside 9673 - Main Gear Wheel with bronze bush fitted

Rear Suspension Units Norton Dominator (Pair)
Slimline
Length middle-middle hole 305 mm = 12"
Hole diameter top 10 mm
hole diameter bottom 12 mmWidth at mounting bushes 20 mm
 

Triumph Trident Conrod used
needs small end bush

for restoration - no warranty

Triumph Racing Piston 8421 Std Pair
1939-40, T100. 9.75:1
63mm
Gudgeon Pin with Bush DM: 21mm#
with Piston Rings
no Circlips

for restoration - no warranty

Triumph 350/500cc Crankshaft f. Unit Construction usedno guarantee

Timing side Bush needs to be reground to -30
and the conrod side to -40please look at all pictures

Norton16H Kickstart Ratchet Gear, Low Gear and Kickstart Wheel, N 8045, 29T. used
no bush
used - good condition

Conrod AJS/Matchless WHT NOS incl. small end bush alloy Please look at all pictures

BSA A65 Crankshaft used STD it is now standard size, needs to be ground to -10 Shells in stock 67-1431.010 Timing side bush in stock, 68-0657A/030   this can be bored to fit thread on end slightly bent for restoration - no guarantee

AJS/Matchless Sprocket / Rear Brake Drum f. QD Wheel
42T. - rubber bushes
Made in England Measurements last pict.

f. BSA A10, A7, B32, B33, Gold Star Mod. witch covered stanchions, std. handlebars Mod.
L: 573mm
OD: 35mm
ID: 26mm

Made in UK.

M20 1949-56 rigid
M21 1949-58 rigid
M33 1949-57 rigid
for 8" brake
OD Parallel tube for bushes: 31.8 mm
Price per Pair
 

Fork Stanchions BSA A65
1964 - 1968
Price per Pair
4 holes radially
L: 573mm
OD Clamp: 35mm
ID: 27mm
OD Parallel tube for bushes: 31.8 mm
Made in England

First Gear Assembly on Gearshaft inc Bush - 25T Fits 12R Gearbox Only - SEE MAS122 - 26T for standard ratio


Made by Velocette - Velocette Ltd.

Triumph Fork Set  T100. T120. TR6 1965-6897-1842 - Fork Leg left97-1843 - Fork Leg right97-1889 - Fork Stanchions97-0000-A. H441*2 97-0441 H443*2 97-0443 H1500*2 97-1500 - Repair Kit Triumph 650cc Fork Bush & Seal Kit 1964 - 1970 BSA A50 +A65 -1970 Rocket 3 Triumph 500cc 1964-73 BSA Shuttle Valve Forks 1968-7097-1654*2 - Front Fork Oil Seal Holder All made in England

BSA Fork Repair KitA7, A10 1946-62B31,B32,B33, B34 1946-60  Gold StarA50, A65 Early 1963-66M20, M21, M23 1946-57All Parts made in England!!89-5061 fork stanchions - hard chromed29-5310.45-5315 Oil seal holders 1 Pr.29-5347.65-5424. Bushes 4x Seals89-5036-P Progressive Springs65-5331s+97-2653 Fork Top Nut and Washer 2x29-5320 Circlips 2xPlease look at all pictures