Search

Rear Wheel Hub Triumph
all Rigid Models 1937-1954
incl. 3T, 3S, 5H, 5S, 6S, TRW, 3HW, 3T, 5T, and 650cc T110 and 1954 onlyno grease nippleOriginal Part number bearing W7A  Timken Type bearing  OD 1 3/4"  ID 9/16This hub fits the axle W61see meas. last picture - please view ALL Pictures.ID 1 3/4"  ca. 44,4 mm

Bellmouth Amal 276. 6. 76 series Standard Alloy L: 16 mm ID at thread approx. 30 mm please look at ALL pictures

Throttle Slide No.4 Amal 276. 76. 6.AD: 1 3/16 = ca. 30 mm

Made in England

Throttle Slide No.3 Amal 276. 76. 6.
OD 1 3/16 = ca. 30 mm

Made in England

Throttle Slide No.5 Amal 276. 76. 6. OD: 1 3/16 = ca. 30 mm

Made in England

Shim .062 Vincent

OD: 38mm
ID: 26mm
Thickness: 1.6mm

Made in England by the Vincent Motorcycle Company

AJS/Matchless/Velocette/Ariel/Norton/Royal Enfield Speedo Drive 2:1
AJS/M. Rigid 1937-1950
also can be used f. other Models-need larger hole. Hole diameter 16 mmIf mounted on rear wheel - right hand side- output drive forwards on top- the cable turns clockwiseIf mounted on front wheel --left hand side- output drive upwards-the cable turns anticlockwiseThis can be used for WM20, but it depends, which speedo is fitted, clockwise or anticlockwise.

Amal Carburettor Concentric 626/300 PremierMainjet 160needle Jet 106Pilot RJ17Valve 3made in UK

Amal Velocette KSS Carburettor 1947-49 STDMain Jet: 160Needle Jet: 106Valve: 3 Made in EnglandPlease look at all pictures

Cylinder Liner Vincent STD.
OD: 90.8/96.5 mm
ID: 83 mm
L: 160 mm

Made by Velocette

Cylinder Liner Vincent /30
OD: 91,3/96,5 mm
ID: 83 mm
L: 160 mm
+ 0,060 on OD
Made by Velocette/England

Cylinder Liner Vincent /60
OD: 92.1/96,5 mm
ID: 83 mm
L: 160 mm
+ 0,060 on OD
Made by Velocette

Clutch Cable BSA 350/500cc B34
GS-Clip Ons-DBD Gearbox end: 1/4" x 26 TPI Lever end: 5/16 x 26 TPI
Inner: 139,5cm
Outer: 123,5cm

Fits Amal Carb. Series 6 - 76 - 276 - 9 - 89 - 289
1928 - 1654

Made in England

Carburettor Main Jet 190 Amal
Fits Amal Carb. Series
6 - 76 - 276 - 9 - 89 - 289
1928 - 1654

Made in England

Carburettor Main Jet 210 Amal
Fits Amal Carb.Series
6 - 76 - 276 - 9 - 89 - 289
1628 - 1954

Made in England

Carburettor Main Jet 260 Amal
Fits Amal Carb. series
6 - 76 - 276 - 9 - 89 - 289 1628-1954

Made in England

Matchless Spring Flame 1949/50
and GLS, G80S 1951
6022 x 1
6024 x 1
6025 x 16
6027 x 1
6028 x 2
6031 x 1
6288 x 1
6292 x 2
 

Triumph Flat Washer 3/8" x 3/4 x 1.6 mm
Large Dynamo Sprocket Tab Washer
Made in England

S25-6
NW236
42-5832 35-4224

Bsa Sloper Piston. 500cc. 1925-31 +020

Measurements see last pict. gudgeon pin 16 mm

S25,S26,S27,S28,S29,S30-
9,S31-7 493cc ,SV 1925-31 Please look at all pictures including gudgeon Pin, piston rings and circlips Piston Clearance 0.12mm or 45thou

BSA Transfer Set Pre 19186729*3. 7971.6078*2This are waterslide transfers

Sidestand used 8.5" long Bolt 7/16 26Tpi.   for restoration - no warranty

AJS/Matchless. Clutch Center  for 4 Spring 4 Plate Clutch Burman 350ccThis part can also be used for 500cc. only using 4 clutch plates. 2-X-16 is not avalable. use a little more clutch spring tension if there is slip.1939 - 49Made in EnglandPlease look at all picutres

Bsa Sloper Piston. 500cc. SV 1925-31 +060 81.5 mm

Measurements see last pict.gudgeon pin 16 mm

S25,S26,S27,S28,S29,S30-
9,S31-7 493cc ,SV 1925-31including gudgeon Pin, piston rings and circlipsPiston Clearance 0.12mm or 45thou

Gearbox Sprocket 17T. BSA A7 A10
1654-61
late B31 B32 B33 B34
Gold Star -1965
5/8 x 3/8 Chain 110-056-...
Chain 530

Made in England